Power Window Repair Parts & Service



Power Window Reset for later-Gen?s

Posted by [email protected] on November 27, 2012 at 4:45 PM

These instructions can be utilized to reset the power window modules for newer-generation Nissan and Infiniti products 

Reset Power Windows:  If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window more than halfway by operating the power window switch.

4. Pull the power window switch and hold it to close the window, and then hold the switch for more than 3 seconds after the window is closed completely.

5. Release the power window switch. Operate the window by automatic function to confirm the initialization is complete.

6. Perform steps 2 through 5 above for other windows.

407-415-5401 Orlando 386-320-3855 Daytona Power Window Repair

Categories: None

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.

Already a member? Sign In